Synthes va prox tibia inventory

The new 3.5/4.5 Variable Angle LCP Periprosthetic Proximal Femur Plating System was developed for treatment of Vancouver types A and B fractures. It is offered in stainless steel. The modular system consists of anatomically pre-shaped plates with variable angle locking screw technology. The versatility of the system allows the surgeon to connect the plate components in various configurations ...

Synthes 3.5mm LCP Posteromedial Proximal Tibia Plates are indicated for internal fixation of posteromedial proximal tibia fractures including buttressing of fractures of the proximal, distal, and metaphyseal areas of the tibia. Prescription Use X AND/OR Over-The-Counter Use (Per 21 CFR 801.109) (21 CFR 807 Subpart C) ...A.L.P.S. Distal Tibia Plating System 14 Medial Distal Tibia Locking Plate Compression holes in the shaft of the plate for 3.5 mm and 4.0 mm Non-Locking Screws Distal tab for 3.5 mm and 4.0 mm Non-Locking Screw conforms to shape of medial malleolus Proximal bullet tip facilitates submuscular plate insertion Low-profile, anatomically contoured plateVariable Angle Locking Screw Technology. Variable angle (VA) locking screw technology allows freedom to choose screw trajectory up to 15° in each direction to avoid existing implants, prosthesis, or independent lag screws. A variety of lengths are available which allow for desired spanning of the femur. 4.DESCRIPTION. LCP™ Proximal Tibia Plates merge conventional plating techniques with locking screw technology to enable surgeons to create a fixed-angle construct while using familiar plating techniques. They are available in 3.5- and 4.5-mm sizes to accommodate a variety of fractures. Product Specifications. How to Use This Product.SYNTHES 3.5 MM VA-LCP PROXIMAL TIBIA PLATE SYSTEM: Applicant: SYNTHES (USA) PRODUCTS LLC: 1230 Wilson Dr: West Chester, PA 19380 Applicant Contact: THOMAS N SHEA: Correspondent: SYNTHES (USA) PRODUCTS LLC: 1230 Wilson Dr: West Chester, PA 19380 Correspondent Contact: THOMAS N SHEA: Regulation Number: 888.3030 ...VA-LCP® MEDIAL COLUMN FUSION PLATES 3.5 VA LOCKING CALCANEAL PLATES 2.7 VA-LCP Ankle Trauma System 2.7/3.5 VA-LCP Anterior Clavicle Plate VA-LCP Condylar Plate 4.5/5.0 VA-LCP Distal Humerus Plates 2.7/3.5 VA-LCP Olecranon Plates 2.7/3.5 VA-LCP Proximal Tibial Plate 3.5 VA-Locking Intercarpal Fusion System

Variable Angle Locking Patella Plating System. The VA Locking Anterior Patella Plate 2.7 is designed to address different fracture patterns as per approved indication. The surgical technique guide includes two sections: Complex Fractures – 3-hole and 6-hole plates are recommended. Simple Fractures – Core, 3-hole, and 6-hole plates may be ...Tibia Plate with locking screws. 2.7 mm or 3.5 mm cortex screws may also be used as lag screws through the plate by overdrilling the near fragment. Note: To verify that independent lag screws will not interfere with plate placement, evaluate placement with AP and lateral fluoroscopic image. LCP Distal Tibia Plate • Surgical Technique 5The sequential introduction of plating and screw technologies has led to a total number of more than 20 DePuy Synthes sets to support small fragment procedures involving shoulder, clavicle, elbow, tibia and fibula anatomies. Surgical treatment of small bone trauma occurs worldwide about every 18 seconds and represents about 25% of all bone ...Placa VA-LCP 3.5 para tibia proximal Técnica quirúrgica - Read more about placa, proximal, broca, tibia, tornillos and synthes. Show menu. Buy now. Swipe Vertical Scroll Horizontal Scroll Page Turn View Mode. Share from cover. Share from page. Table of contents. Page Overview. 1 out of 76.LCP Periarticular Proximal Humerus Plate 3.5 LCP Posterior Medial Proximal Tibial Plate 3.5 LCP Proximal Femoral Hook Plate 4.5/5.0 LCP Proximal Femoral Plate 4.5/5.0 LCP Proximal Radius Plates 2.4 LCP Proximal Tibial Plate 3.5 LCP Proximal Tibial Plate 4.5/5.0 with Periarticular Aiming Arm Instruments LCP Superior Anterior Clavicle Plate LCP ...The LCP Low Bend Medial Distal Tibia Plate 3.5 mm is part of the Synthes Small Fragment LCP system that merges locking screw technology with conventional plating techniques. The combi-holes in the LCP plate shaft combine a dynamic compression unit (DCU) hole with a locking screw hole. Combi-holes provide the flexibility of axial compression and ...The aim of this study was to evaluate the clinical and/or radiologic outcome using different polyaxial locking plates for the treatment of proximal tibia fractures, the Non-Contact-Briding plate (NCB-PT®) by Zimmer or the Variable Angle Locking Compression Plate (VA-LCP®) by Synthes. This study enrolled 28 patients with proximal tibia fractures (AO/ OTA 41 B-C) and indication for locking ...Gather AI, a startup using drones and software to sell inventory management services to warehouse operators, has raised $10 million. Gather AI, a startup using drones to inventory ...

treated for tibial fractures over the past two decades. The average age of patients with tibial fractures has increased by 7 years, from 42 to 49, between 1993 and 2015.2 2. Tibial nails are increasingly being used for the treatment of metaphyseal fractures of the proximal and distal tibia, besides generally being considered the gold standard forClinical Resources. Surgical Technique Guide. Instructions for Use. -. The 2.4mm LCP Distal Radius System is part of the Locking Compression Plate System that merges locking screw technology with conventional plating techniques.4.5 mm LCP® Proximal Tibia Plates - synthes.vo.llnwd.netThe MAXFRAME™ System is a ring fixation system that can be customized by the surgeon to address the individual characteristics of each case and enables surgeons to construct circular frames for acute correction as well as gradual correction with computer assistance. 1,2 *. Product Specifications.6 DePuy Synthes VA-LCP Proximal Tibial Plate 3.5 Surgical Technique Preparation 1. Preparation Required sets 01.127.001 VA-LCP Proximal Tibial Plates 3.5, Stainless Steel 01.127.003 VA Instruments and Long Screw Insertion Instruments 3.5 01.127.004 Aiming Arm Instruments for VA-LCP Proximal Tibial Plates 3.5 VA Locking Screws B 3.5 mm Optional sets

Kramer lum funeral home.

Visualization of the proximal tibia under fluoroscopy in both the lateral and AP views is necessary. 6 Synthes LCP Medial Proximal Tibial Plate 3.5 Technique Guide X-ray template for right LCP Medial Proximal Tibial Plate 3.5 (Art. No. 034.000.502) X-ray template for left LCP Medial Proximal Tibial Plate 3.5 (Art. No. 034.000.505)Page 4 and 5: VA-LCP Proximal Tibial Plate 3.5. P; Page 6 and 7: AO Principles In 1958, the AO formu; Page 8 and 9: Preparation 1 Preparation Required ; Page 10 and 11: Preparation 3 Surgical approach Dep; Page 12 and 13: Plate Insertion and Fixation 2 Prep; Page 14 and 15: Plate Insertion and Fixation InsertMar 18, 2021 · The NCB-PT® as well as the VA-LCP® allows a variation of screw positioning within specified limits. Besides these two products there are numerous other polyaxial plate systems for the proximal tibia available. However, at the current moment there are no prospective studies including different polyaxial locking plates in proximal tibial fractures.3.5 mm LCP Medial Distal Tibia Plates Plate features - natomically contoured; plate is twisted A 20° and bent to fit the distal tibia - vailable for left and right tibias A - imited-contact shaft design with L 4 to 14 combination locking/ compression holes - ight distal locking holes accept E 2.7 mm cortex, 3.5 mm locking, 3.5 mm cortex, or 4.0 mm cancellous bone screws - roximal ...Placa VA LCP para tibia proximal 3.5 Sistema de bloqueo VA para artrodesis intercarpiana Placas LCP de ángulo variable de artrodesis para MTP 1 2.4/2.7 Placa LCP de ángulo variable para radio distal dorsal 2.4 Sistema de placas LCP de ángulo variable para antepié y mesopié 2.4/2.7 Placa LCP de ángulo variable de malla 2.4/2.7

VA Locking Anterior Patella Plate 2.7 can be used in conjunction with the following screw implants: Variable Angle Locking Screw B 2.7 mm Cortex Screw B 2.7 mm In addition, for non-load bearing fragments: Variable Angle Locking Screw B 2.4 mm Cortex Screw B 2.4 mm Synthes has not assessed compatibility with devices provided by other manufactur-Inventory Control Form Small Fragment Locking Compression Plate (LCP™) System 204.848 3.5 mm Locking Screws, self-tapping, with StarDrive™ Recess Length 202.830 30 mm 202.832202.812 32 mm 202.834 34 mm 202.816 202.836 36 mm 202.818 202.838 38 mm 202.840202.820 40 mm 202.845 45 mm 202.850 50 mm 202.826 202.855 55 mm …Placa TomoFix para tibia proximal medial (MHT) PLACAS VA LCP® DE ARTRODESIS PARA LA COLUMNA MEDIAL 3.5 PLACAS VA DE BLOQUEO PARA CALCÁNEO 2.7 Sistema para tobillo VA LCP Trauma 2.7/3.5 Placa VA LCP para clavícula anterior Placa VA LCP condílea 4.5/5.0 Placas VA LCP distales para húmero 2.7/3.5 Placas VA LCP para olécranon 2.7/3.5312.924 Guiding Block for TomoFix Tibial Head Plate, small, medial, proximal 440.831 TomoFix Tibial Head Plate, small, medial, proximal, shaft 4 holes, head 4 holes, length 112 mm. Pure Titanium 312.926 TomoFix Guiding Block for TomoFix Tibial Head Plate, medial, proximal 440.834 TomoFix Tibial Head Plate, medial, proximal, 4 holes.The Universal Small Fragment (USF) System is intended to be used for small bone trauma, including anatomy such as Shoulder, Clavicle, Elbow, Tibia and Fibula. The core set can support any DePuy Synthes 2.7mm or 3.5mm non-locking, LCP® or VA LCP® Implant System. Training topics for USF. System Trays. Instruments.AA Medical Store improves healthcare around the world by supplying refurbished state-of the-art surgical devices at the best price, with the best warranty, and unmatched service and support.3.5 mm. Remove the cortex screw from hole 1 and replace it with a bicortical, self-tapping locking screw. Screw the drill sleeve exactly into the threaded part of the combi-hole and drill the hole with the LCP drill bit 4.3 mm. Determine the screw length and insert the screw as described on page 15.Inventory; Delete Set. Manage Set Trays and Contents Save Changes. UNIVERSAL SMALL FRAGMENT VA-LCP PROX TIBIA SET EVAL Add Tray Kit Trays and Contents Collapse All Expand All. Primary Tray (34 Parts) Add products to tray Move To; Top of the kit; Bottom of the kit ...6 DePuy Synthes 3.5 mm LCP ® Periarticular Proximal Humerus Plate Surgical Technique 01.122.033. Preparation . Required set . 105.434/ Small Fragment LCP Instrument and Implant 145.434 Set, with self-tapping screws (stainless steel or titanium) Optional sets . 01.122.033 Proximal Humerus Instrument Module Set 105.90 Bone Forceps SetThe ATTUNE™ Cementless Knee System includes the patented technologies of the ATTUNE Knee System. We have maintained the ATTUNE GRADIUS™ Curve to provide stability through the range of motion 1,2,3 and GLIDERIGHT™ Articulation for improved patella-femoral kinematics. 4 The SOFCAM™ Contact provides smooth engagement while minimizing stresses to the tibial spine 5,6 for the PS variants.Minimally invasive surgery has been described widely for proximal and distal tibial fractures, especially for fractures of the metadiaphyseal and peri-articular areas. ... (Synthes, Zuchwil, Switzerland), respectively. The patients were positioned supine on the radiolucent table with 15° of flexion of the knee joint. Tibia was exposed proximal ...

LCP™ Proximal Femur Plate (4.5/5.0mm) Variable Angle LCP™ Ankle Trauma System (2.7 mm/3.5 mm) 3.5 mm LCP ® Anterolateral Distal Tibia Plates; 3.5 mm Variable Angle LCP ® Proximal Tibia Plate; 4.5 mm LCP ® Proximal Tibia Plate; Continuous Compression Implants for Trauma Applications; TomoFix ® Medial High Tibia Plate; Power Tools. UNIUM ...

LCP Periarticular Proximal Humerus Plate 3.5 LCP Posterior Medial Proximal Tibial Plate 3.5 LCP Proximal Femoral Hook Plate 4.5/5.0 LCP Proximal Femoral Plate 4.5/5.0 LCP Proximal Radius Plates 2.4 LCP Proximal Tibial Plate 3.5 LCP Proximal Tibial Plate 4.5/5.0 with Periarticular Aiming Arm Instruments LCP Superior Anterior Clavicle Plate LCP ...2.7mm va-lcp distal tibia t-plate/6 holes-sterile synthes gmbh. fda.report › gudid › synthes gmbh › h67902118307s0. ... 3.5mm va-lcp prox tibia trial implant-small bend/3h/rt: h679031270110: stopper for 3.5mm va-lcp prox tibia plate aiming arm: h679031270100:DESIGN EVIDENCE TFN-ADVANCED™ Proximal Femoral Nailing System (TFNA) Rotational and Static Locking ABSTRACT The TFN-ADVANCED™ Proximal Femoral Nailing System (TFNA) features a pre-assembled locking mechanism within the nail to allow the intra-operative decision of rotational locking (control the rotation of the helical blade or lag screw) or statically locking (control the rotation and ...synthes.vo.llnwd.netThe standard locking tibial nail has a cylindrical proximal end with a Herzog bend of 11 degrees and provisions for locking bolts. However, with the introduction of newer nails with multidirectional locking options in the distal and proximal ends (e.g., Synthes Expert Tibial Nail), the indications have expanded to fractures of ends of long ...LCP Proximal Tibia Anatomy Tray 50 VA LCP Distal Tibia Anatomy Tray 52 LCP Distal Tibia Anatomy Tray 54 VA LCP Distal Fibula Plates with 4.0 mm Cortex Screws and Instruments Tray 55 VA LCP Distal Fibula Anatomy Tray 57 ... set can support 2.7 mm/3.5 mm DePuy Synthes non-locking, LCP™, and VA LCP™ plating technologies. ThisInventory Control Form Variable Angle Locking Hand System Titanium 1.3 mm Titanium Locking Plates* 04.130.150 Straight Plate, 6 holes 04.130.151 Straight Plate, 12 holes 04.130.152 T-Plate, 3 holes head, 5 holes shaft 04.130.153 Y-Plate, 3 holes head, 5 holes shaft 04.130.154 Phalangeal Base Plate, 2 holes head, 5 holes shaft

Speed x shein.

Brown red gamefowl for sale.

Insert the internal fixator between the anterior tibial muscle and the periosteum. Slide the LISS plate in the distal direction with its distal end in constant contact with the bone. Position the proximal end of the fixator against the lateral condyle. Carefully find the correct posi-tion of the LISS on the condyle.DIAMETER LENGTH. 03.113.024 2.8 mm 250 mm, 95 mm calibration. 3.5 mm Variable Angle Locking Screws, Self-Tapping, T15 Stardrive. LENGTH LENGTH.UNIVERSAL SMALL FRAGMENT LCP PROX TIBIA SET EVAL Add Tray Kit Trays and Contents Collapse All Expand All. Primary Tray (0 Parts) Add products to tray Move To; Top of the kit; Bottom of the kit ... The custom kit capabilities sole purpose is for convenience of inventory and device usage identification.TN-ADVANCED™ Tibial Nailing System | DePuy Synthes. The TN-A is offered inside the following nail diameters: 8.2 mm, 9 mm, 10 width, 11 mm, 12 mm and 13 mm. The proximal napping diameter is 11 mm for all nails with nail shaft diameters from 8.2 mm into 11 mm. With large nail car the proximal nail diameter is the similar as the nail socket side.rod to the proximal fragment. Insert the reduction instrument to the desired depth. Pass the reaming rod through the cannulation of the in-strument. Remove the reduction instrument. Note: Use the rod pusher to help retain the reaming rod during the extraction of the reduction instru-ment. RFN-Advanced System Surgical Technique DePuy Synthes 13The Synthes Proximal Femur Plates family of implantable devices consist of LCP™ Proximal Femoral Plate 4.5/5.0 and Synthes LCP™ Proximal Femoral Hook Plate 4.5/5.0 and are available in various sizes in both sterile ... TomoFix ® Medial High Tibia Plate; VA LCP™ Periprosthetic Proximal Femur Plating System; Knee. Knee Arthroplasty. AOX ...2 Synthes LCP Proximal Tibial Plate 3.5 Technique Guide The LCP Proximal Tibial Plate 3.5 is part of the Small Frag-ment LCP System, which merges locking screw technology with conventional plating techniques. The LCP Proximal Tibial Plate 3.5 has a limited-contact profile. The head and neck portions of the plate accept 3.5 mmInventory Control Form TN-ADVANCED™ Tibial Nailing System Implants Date: Hospital: Surgeon: Procedure: Case Information (eg, Case ID): TN-ADVANCED™ Tibial Nailing System Ø 8 mm, Sterile Right Part # Length (mm) 04.043.005S 255 mm 04.043.010S 270 mm 04.043.015S 285 mm 04.043.020S 300 mm 04.043.025S 315 mm 04.043.030S 330 …The VA Locking Calcaneal Plating System is designed to treat complex fractures with multiple fixation points targeting key areas of hard cortical bone in the calcaneus. It consists of plates and screws with variable angle locking technology to offer a variety of options for fixation. Product Specifications. How to Use This Product. ….

pilot hole in the tibia. Drive the tibia screw into the tibia by turning the driver clockwise until it is fl u s h with the lateral tibia wall. Notes: • A n increase in torque indicates that the shoulder of the driver has contacted the lateral cortex of the tibia. • T actile feedback may be more subtle in less dense bone. Precautions:The DePuy Synthes 3.5 mm LCP® Proximal Tibia Plate and 3.5 mm LCP Proximal Tibia Plate—Low Bend are part of the Locking Compression Plate (LCP) System, which merges locking screw technology with conventional plating techniques. The 3.5 mm LCP Proximal Tibia Plates have a limited-contact profile.The Universal Small Fragment System can support all 2.7 mm/3.5mm non-locking, LCP™ System, and VA LCP™ Locking Technologies. It consists of two components: A core set of instruments, screws, and standard implants. Modular anatomic implant trays for supported small fragment anatomy. Get in Touch with a Sales Consultant.Indications The Synthes LCP Low Bend Medial Distal Tibia Plates are intended for fixation of complex intra- and extra-articular fractures and osteotomies of the distal tibia, as a part of the Synthes Small Fragment LCP System. Synthes 5. Open the catalog to page 7. Complete the preoperative radiographic assessment and prepare the preoperative plan.About This Product. The system consists of three plate types, each one available in left and right version: Lateral Plate. Shaft Plate. Medial Plate. The VA LCP Clavicle Plates are made up of stainless steel and titanium alloy. The holes of the plates accept 2.7 mm cortex screws, 2.7 mm VA locking screws and 2.7 mm metaphyseal compression screws.Variable Angle Locking Patella Plating System. Product Codes : 02.137.000S, 02.137.001S, 02.137.002S... View More. PRODUCT CODES. DESCRIPTION. The VA Locking Patella Plates are designed for a diverse range of fractures and are universal for either left or right use. Available in Stainless Steel and Titanium, the plates are pre-contoured and ...TomoFix Medial High Tibial Plate (MHT) VA-LCP® MEDIAL COLUMN FUSION PLATES 3.5 VA LOCKING CALCANEAL PLATES 2.7 VA-LCP Ankle Trauma System 2.7/3.5 VA-LCP Anterior Clavicle Plate VA-LCP Condylar Plate 4.5/5.0 VA-LCP Distal Humerus Plates 2.7/3.5 VA-LCP Olecranon Plates 2.7/3.5 VA-LCP Proximal Tibial Plate 3.5DESCRIPTION. Our LCP™ Curved Locking Compression Plates are part of the DePuy Synthes Trauma LCP™ Locking Compression Plate System. This stainless steel and titanium plate screw system merges locking screw technology with conventional plating techniques for use in various orthopaedic trauma applications. Get in Touch with a Sales …The new Variable Angle LCP Ankle Trauma 2.7/3.5 system was developed to overcome these shortcomings. The low-profile plates feature variable angle locking … Synthes va prox tibia inventory, 324.003 LISS Insertion Guide for Proximal Tibia, orleft 324.004 LISS Insertion Guide for Proximal Tibia, right1 324.043 Fixation Bolt for LISS Insertion Guide 2 324.044 Stabilization Bolt for LISS Insertion Guide 3 324.022 Drill Sleeve for LISS Insertion Guide 4 321.170 Pin Wrench B 45. mm 5 Note:, Variable Angle Locking Patella Plating System. The VA Locking Anterior Patella Plate 2.7 is designed to address different fracture patterns as per approved indication. The surgical technique guide includes two sections: Complex Fractures – 3-hole and 6-hole plates are recommended. Simple Fractures – Core, 3-hole, and 6-hole plates may be ..., The 3.5 mm LCP Proximal Tibia Plates have a limited-contact profile. The head and neck portions of the plates accept 3.5 mm StarDrive™ Recess Locking Screws. The screw hole pattern allows a raft of subchondral locking screws to buttress and maintain reduction of the articular surface. This provides resistance to local depression loads in ..., Inventory Control Form Variable Angle LCP Distal Radius Plates Implants (cont’d) 2.7 mm Cortex Screw, self-tapping, Drill Bits with T8 STARDRIVE Recess Plate Reduction Wires 2.4 mm Locking Screw, self-tapping, with T8 STARDRIVE Recess 1.25 Plate Reduction Wire, threaded top with large stop, 150 mm Kirschner Wires with T8 STARDRIVE Recess 02 ..., Indices Commodities Currencies Stocks, Variable Angle Locking Patella Plating System. Product Codes : 02.137.000S, 02.137.001S, 02.137.002S... View More. PRODUCT CODES. DESCRIPTION. The VA Locking Patella Plates are designed for a diverse range of fractures and are universal for either left or right use. Available in Stainless Steel and Titanium, the plates are pre-contoured and ..., Easy plate insertion Compression of the lateral hinge TomoFix technique allows pretension- ng of the plate using cortex screw and TomoFix Knee Osteotomy System TomoFix Tibial Head Plate medial, proximal wedge high tibial - Increased plate strength preload technique stable bridging small stature versions TomoFix Tibial Head Plate lateral, proximal wedge osteotomies stable fixation - Available ..., Results. This study included 144 posterolateral tibial plateau fractures. When not using screws in a variable angle (VA) manner, the fixation effectiveness for posterolateral fragments was 58.3% for the DePuy Synthes locking compression plates (LCP), 47.9% for the DePuy Synthes VA-LCP, 50.7% for the Zimmer plate, and 43.8% for the Biomet plate., 0X.211.201 - X-Plates 2.4/2.7, VA locking 0X.211.204 (Extra-Small, Small, Medium, Large) For full ordering information and product details please refer to technique guide "Variable Angle LCP Forefoot/Midfoot System 2.4/2.7" 036.001.232. The general fusion plates consist of variable angle cortex screws, and a compression feature to tive ..., About This Product. The system consists of three plate types, each one available in left and right version: Lateral Plate. Shaft Plate. Medial Plate. The VA LCP Clavicle Plates are made up of stainless steel and titanium alloy. The holes of the plates accept 2.7 mm cortex screws, 2.7 mm VA locking screws and 2.7 mm metaphyseal compression screws., synthes.vo.llnwd.net, Insert the internal fixator between the anterior tibial muscle and the periosteum. Slide the LISS plate in the distal direction with its distal end in constant contact with the bone. Position the proximal end of the fixator against the lateral condyle. Carefully find the correct posi-tion of the LISS on the condyle., LCP Periarticular Proximal Humerus Plate 3.5 LCP Posterior Medial Proximal Tibial Plate 3.5 LCP Proximal Femoral Hook Plate 4.5/5.0 LCP Proximal Femoral Plate 4.5/5.0 LCP Proximal Radius Plates 2.4 LCP Proximal Tibial Plate 3.5 LCP Proximal Tibial Plate 4.5/5.0 with Periarticular Aiming Arm Instruments LCP Superior Anterior Clavicle Plate LCP ..., SYNTHES (USA) SYNTHES (Canada) Ltd. To Order: (800) 523-0322 To Order: (800) 668-1119 Date: Hospital: Surgeon: Procedure: Implants Patient Information: J5632-H 11/12 Inventory Control Form Titanium Cannulated Tibial Nail-EX Titanium Cannulated Tibial Nail-EX, sterile 8.0 mm diameter LENGTH LENGTH 04.004.231S 255 mm 04.004.234S 270 mm 04.004 ..., LCP Medial Proximal Tibial Plate 3.5 LCP Medial Proximal Tibial Plate 4.5/5.0 LCP Metaphyseal Plate for distal medial tibia LCP Metaphyseal Plates LCP Olecranon Plate LCP Pediatric Condylar Plate 90°, 3.5 and 5.0 LCP Pediatric Plate System LCP Periarticular Proximal Humerus Plate 3.5 LCP Posterior Medial Proximal Tibial Plate 3.5, Consult Depuy Synthes's entire Expert Tibial Nail PROtect: The first antibiotic-coated tibial nail catalogue on MedicalExpo. ... VA LCP ® Distal Radius System. 8 Pages. Building on Success. ... 15 Pages. 2.4 mm Variable Angle LCP® Volar Rim Distal Radius Plates. 37 Pages. TFN-ADVANCED™ Proximal Femoral Nailing System (TFNA) 5 Pages ..., 2.7 MM VA LCP™ CLAVICLE System. 02.112.610, 02.112.611, 02.112.612... Designed based on an analysis of clavicle CT scans to enhance plate-to-bone fit on a broad range of patients 1 and to treat lateral, shaft and medial fractures for small, medium and large clavicles. Plate selection based on correlation between patient stature and clavicle ..., The Synthes Proximal Femur Plates family of implantable devices consist of LCP™ Proximal Femoral Plate 4.5/5.0 and Synthes LCP™ Proximal Femoral Hook Plate 4.5/5.0 and are available in various sizes ... TomoFix® Medial High Tibia Plate; Variable Angle Locking Calcaneal Plating System (2.7 mm) ... 2.7 MM VA LCP™ CLAVICLE System; …, The 04.004.643S | Synthes 12MM TI Tibial Nail EX 315MM offers a variety of proximal and distal locking options, giving the surgeon the ability to tailor fixation to the fracture pattern. The Titanium Cannulated Tibial Nail — EX is available in a universal design for the left or right tibia, with a 10.5° bend starting at 75 mm proximally and ..., The ATTUNE™ Cementless Knee System includes the patented technologies of the ATTUNE Knee System. We have maintained the ATTUNE GRADIUS™ Curve to provide stability through the range of motion 1,2,3 and GLIDERIGHT™ Articulation for improved patella-femoral kinematics. 4 The SOFCAM™ Contact provides smooth engagement while minimizing stresses to the tibial spine 5,6 for the PS variants., Titanium Cannulated Hindfoot Arthrodesis Nail Surgical Technique DePuy Synthes 9. Opening the Hindfoot. 3. Determine entry point. Instrument. 03.010.115 3.2 mm Guide Wire, 290 mm On a lateral fluoroscopic image, identify and mark the center of the tibial canal with the help of the 3.2 mm guide wire held adjacent to the leg., The prep of legal paperwork can be expensive and time-consuming. However, with our predesigned online templates, things get simpler. Now, working with a Synthes Medial Distal Tibia Plate Inventory Control Form takes no more than 5 minutes. Our state-specific browser-based samples and clear guidelines eliminate human-prone faults., 6 DePuy Synthes VA-LCP Proximal Tibial Plate 3.5 Surgical Technique Preparation 1. Preparation Required sets 01.127.001 VA-LCP Proximal Tibial Plates 3.5, Stainless Steel 01.127.003 VA Instruments and Long Screw Insertion Instruments 3.5 01.127.004 Aiming Arm Instruments for VA-LCP Proximal Tibial Plates 3.5 VA Locking Screws B 3.5 mm Optional sets, Intended use: The DePuy Synthes VA Locking Patella Plating System is intended to provide internal bone fixation for simple, complex, and comminuted patellar fractures. ... Vestergaard V, Pedersen AB, Tengberg PT, et al. 20-year trends of distal femoral, patellar, and proximal tibial fractures: a Danish nationwide cohort study of 60,823 patients ..., The Large External Fixation System uses a modular construction to allow flexibility and a variety of forms of assembly to externally stabilize long bones, pelvic ring fractures, arthrodesis, and osteotomies. The system combines the Modular Knee Bridge and the Pelvic Frame. Product Specifications., Inventory Control Form Variable Angle LCP Distal Radius Plates 2.4 mm VA LCP Dorsal Distal Radius Plate, Intermediate Column Shaft Holes Length (mm) Angled 02.115.630 3 41 +90° 02.115.631 3 41 –90° 02.115.640 4 49 +90° 02.115.641 4 49 –90° 2.4 mm VA LCP Dorsal Distal Radius L-Plate, 2 holes head, DCPTM and LC-DCPTM Systems - synthes.vo.llnwd.net, Synthes (USA) Synthes (Canada) Ltd. To Order: (800) 523-0322 To Order: (800) 668-1119 Date: Hospital: Surgeon: Procedure: Implants Patient Information: J10176-B 3/13 2.4 mm/2.7 mm Titanium VA-LCP First MTP Fusion Plates Small Inventory Control Form 2.4 mm/2.7 mm Titanium VA-LCP Forefoot/Midfoot Plating System 04.211.230 0° right 04.211.231 0 ..., Purchase a discounted Synthes 239.937 LCP Proximal Tibia Plate, 6 Hole, Left from Alpha Biomedical with a 6 month warranty. Site Information. MAIN MENU. Home; Sell Your Surgical Instruments; ... Synthes 02.107.102 VA LCP Proximal Olecranon Plate, 2 Holes, Left. $245.00. Add To Cart. Synthes 02.118.005 VA LCP Medial Distal Tibia Plate, 6 Hole ..., 2 Synthes LCP Proximal Tibial Plate 3.5 Technique Guide The LCP Proximal Tibial Plate 3.5 is part of the Small Frag-ment LCP System, which merges locking screw technology with conventional plating techniques. The LCP Proximal Tibial Plate 3.5 has a limited-contact profile. The head and neck portions of the plate accept 3.5 mm, Inventory; Delete Set. Manage Set Trays and Contents Save Changes. UNIVERSAL SMALL FRAGMENT VA-LCP PROX TIBIA SET EVAL Add Tray Kit Trays and Contents Collapse All Expand All. Primary Tray (34 Parts) Add products to tray Move To; Top of the kit; Bottom of the kit ..., AA Medical Store improves healthcare around the world by supplying refurbished state-of the-art surgical devices at the best price, with the best warranty, and unmatched service and support., Inventory Control Form 2.7 mm/3.5 mm Variable Angle LCP Ankle Trauma System Available nonsterile or sterile-packed. Add “S” to catalog number to order sterile product. 2.7 mm / 3.5 mm Variable Angle LCP Medial Distal Tibia Plates 02.118.002 4 holes, right 02.118.003 4 holes, left 02.118.004 6 holes, right 02.118.005 6 holes, left